Skip to content

Tech Embounce


Xfinity Modem Blinking Orange ( Quick & Easy Fix) in 2023

    Xfinity Modem Blinking Orange: If you have an Xfinity modem, you may be wondering why it is blinking orange. This is usually an indicator that there is an issue with your modem and it needs attention. In this blog post, we’ll go over what could be causing your Xfinity modem to blink orange, how to troubleshoot the issue, and what to do if the problem persists. By the end, you should have a better understanding of why your Xfinity modem is blinking orange and how to resolve the issue.

    Xfinity Modem Blinking Orange
    Xfinity Modem Blinking Orange

    What should I do if my Xfinity modem blinks orange?

    If you’re seeing your Xfinity modem blinking orange, it can be a bit of a head-scratcher. However, there are a few different steps that you can take to troubleshoot the issue and get your modem up and running again. Below are 6 quick and easy fixes that you can try.

    1. Restart the Xfinity Modem

    If your Xfinity Modem Blinking Orange, one of the easiest solutions is to restart it. This can help reset any minor technical issues that may be causing the problem. To restart your Xfinity modem, you will need to locate and unplug the power cable. After waiting a few seconds, plug the power cable back in and wait for the modem to reboot. You should also make sure that all other cables, such as the coaxial cable and Ethernet cable, are plugged into the correct ports.

    Once the modem has restarted, check to see if the orange light is still blinking. If it is, then you may need to try other troubleshooting methods.

    2. Resetting Your Xfinity Modem

    Resetting your Xfinity modem can often be a quick and effective way of solving common problems with your internet connection. The steps to reset your modem will vary depending on the model you have, so it’s important to check your router’s documentation for specific instructions.

    For most Xfinity modems, resetting the device involves pushing and holding down the “reset” button for around 10 seconds. This will bring the device back to its factory settings and it should begin working properly again. If you find that your modem does not respond to this reset, or if the orange blinking light persists after you reset your router, you may need to contact your service provider for further assistance.

    It is also important to note that when you reset your Xfinity modem, any settings you have previously configured will be lost and must be reconfigured. Make sure you take note of any settings you may have changed prior to resetting the device.

    Xfinity Modem Blinking Orange
    Xfinity Modem Blinking Orange

    3. Check the Coaxial Cable

    If your Xfinity modem is blinking orange, it’s possible that the coaxial cable connecting the modem to the wall is loose or damaged. It’s important to ensure that all cables are securely connected, as a loose connection can lead to slower speeds and other connection issues.

    To check if the coaxial cable is secure, start by unplugging the cable from the wall and the modem. Then inspect the cable for any visible damage, such as cuts or tears. If there is any visible damage, replace the cable with a new one.

    Once you have ensured that the cable is in good condition, plug it back into the wall outlet and then back into the modem. If the orange light continues to blink after reconnecting the coaxial cable, you may need to try a different type of cable. Some modems require a specific type of coaxial cable, so make sure to double-check your modem’s user manual before replacing the existing cable.

    4. Update the Xfinity Modem Firmware

    If your Xfinity Modem Blinking Orange even after trying the other solutions, updating the modem’s firmware can help resolve the issue. Firmware updates can help with a range of technical issues including connection stability, Wi-Fi performance, and more.

    To update your modem’s firmware:

    1. Open up a web browser and enter the IP address of your modem (the default is

    2. Login using your username and password. The default username and password are both “admin” (without quotation marks).

    3. Navigate to the Advanced tab and click on Firmware Upgrade.

    4. Click Check for Updates. If an update is available, you will be able to download and install it.

    5. After the installation is complete, restart your modem and check to see if the blinking orange light has disappeared.

    Updating your modem’s firmware may resolve any connection issues and stop your Xfinity modem from blinking orange. However, if the issue persists, it may be time to contact your Internet Service Provider for further assistance.

    5. Reconnecting Your LAN Cable

    If your Xfinity modem blinking orange, the first step is to check if the LAN cable is properly connected. If not, reconnect it and wait for a few minutes for the modem to establish a connection. To do so, locate the Ethernet port on the back of the modem and connect it to the Ethernet port of your computer or laptop.

    In some cases, you may have to use an Ethernet splitter to ensure that the LAN cable is securely connected. You should also ensure that the LAN cable is firmly plugged in at both ends and make sure that there are no visible signs of damage. If there are any cuts or fraying on the cable, replace it with a new one.

    After you have reconnected the LAN cable, restart the modem by unplugging it and plugging it back in after a few seconds. Now, wait for a few minutes and check if the orange blinking has stopped. If it hasn’t, try resetting the modem or updating its firmware.

    Xfinity Modem Blinking Orange

    6. Relocating Your Xfinity Modem

    Sometimes, Xfinity Modem Blinking Orange can be attributed due to its physical location. If your modem is located in an area that has interference from other electronic devices or equipment, this could cause it to start blinking orange.

    In order to fix this, you will need to physically relocate your Xfinity modem. The best place for it is away from any other electronic devices or equipment, and in an open space with plenty of ventilation.

    Once you’ve chosen the new location for your Xfinity modem, all you need to do is unplug the power cable and the coaxial cable from your modem. Then, simply move it to the new location, plug in the power and coaxial cables, and turn the modem back on.

    If the orange blinking light stops after you have relocated your modem, then you know that you have successfully identified and fixed the issue. However, if the light continues to blink orange, you may need to look into some of the other solutions we have outlined in this blog post.

    The Different LED lights on Xfinity Route

    The Xfinity modem has multiple LED lights that indicate different connection statuses. Understanding these lights will help you identify the problem and determine the best solution for fixing it.

    When the router is first powered on, it should have a solid blue light. This indicates that the router is properly powered and ready for use. A blinking blue light may indicate that the router is attempting to establish a connection, so you may need to wait until the connection is established before attempting any troubleshooting steps.

    Once a connection is established, the light should be solid green. If the light is blinking green, this can indicate that data is being sent or received over the network.

    The orange color usually indicates an issue with the router. If you see a solid orange light, this may indicate that there is a problem with your internet connection or the modem may be experiencing a technical issue. Blinking orange indicates that the modem is trying to establish a connection but is not succeeding. This could be due to incorrect settings, outdated firmware, or a faulty modem.

    If the router’s light turns red, this can indicate a serious problem with the modem or your network connection. In this case, you should restart your modem and try to reconnect to the network again.

    By understanding what each color indicates, you can easily identify any issues with your Xfinity router and quickly find a solution for fixing them.

    Read More Related Topic

    Leave a Reply

    Your email address will not be published. Required fields are marked *