Are you facing Roomba charging error 8? This is a common error encountered by many Roomba owners and can be quite frustrating to troubleshoot. Fortunately, it is possible to fix this error quickly and easily with a few simple steps. In this blog post, we’ll walk you through the 5 steps needed to fix Roomba charging error 8 so that you can get your Roomba up and running again.
Why does Roomba Charging Error 8 occur?
Roomba Charging Error 8 is a common error code that can prevent your Roomba from charging correctly. This error code is often caused by a variety of issues, including a low battery, blocked sensors, or a faulty base station. In order to fix this issue, it’s important to identify the underlying cause so you can take the necessary steps to resolve the problem.
The most common root causes of Roomba Charging Error 8 are:
1. Unplugging the Roomba – If the Roomba has been unplugged while charging, it may not be receiving enough power to start the charging process. You will need to plug the Roomba into the base station again in order to charge it properly.
2. Low Battery – If your Roomba’s battery is low, it may not be able to start charging due to insufficient power. To solve this issue, make sure to plug the Roomba into its base station and allow it to charge for at least an hour before attempting to use it.
3. Blocked Sensors – Roomba’s sensors may become blocked due to dirt and dust buildup, which can prevent the Roomba from properly detecting the base station and thus result in an error code. Cleaning the sensors should help to fix this issue.
4. Faulty Base Station – If the base station is malfunctioning, it may not be able to provide enough power for the Roomba to charge correctly. Try testing the base station with a voltmeter in order to see if there is a fault.
Once you have identified the root cause of the error code, you can take the necessary steps to fix it.
Below are 5 steps that you can follow in order to resolve Roomba Charging Error 8 quickly and easily.
10 Solutions for ‘Roomba Charging Error 8’
When it comes to addressing Roomba charging error 8, the best approach is to identify the underlying cause and then address it in the most appropriate way. Here are 5 solutions for Roomba Charging Error 8.
1. Unplug the Roomba
If you’re experiencing Roomba charging Error 8, the first step you should take is to unplug your Roomba. This will reset the Roomba’s internal power system and can often help resolve minor power-related issues. To unplug the Roomba, simply disconnect the power cord from the wall outlet.
After a few minutes have passed, plug it back in and see if that has resolved the issue. If not, move on to the next steps.
2. Inspect the Base Station
If you are having trouble charging your Roomba, the first thing you should do is inspect the base station. First, check to make sure that the power supply is properly connected to the wall outlet and the base station. If the power cord is connected to a surge protector, make sure that it is turned on.
Then, remove any debris or obstructions from around the base station. Make sure there is nothing blocking the power adapter, as this could prevent your Roomba from charging. Finally, inspect the base station itself for any visible signs of damage or corrosion.
If none of these steps address the issue, then it is likely that your Roomba has a charging error 8 issue. In this case, move on to the next step for possible solutions.
3. Check the Battery
If your Roomba is displaying a charging error 8, one of the first things to do is check the battery. The battery may be damaged or worn out, so it’s important to inspect it for any damage or signs of wear and tear. If the battery appears to be in good condition, you should try to reset it.
To reset the battery, unplug the Roomba from the power outlet, then press and hold the “Clean” button for five seconds. This will trigger a reset, and the Roomba will turn off and on again. After that, plug it back into the power outlet and see if the charging error 8 persists.
If it does, then the battery may need to be replaced with a new one. Make sure you use a compatible battery designed specifically for your model of Roomba. Follow the manufacturer’s instructions carefully when replacing the battery, as improper installation may cause more issues.
4. Check the Wheels
When troubleshooting Roomba Charging Error 8, it’s important to check the wheels of your robot vacuum. The wheel sensor could be preventing your Roomba from correctly docking with the base station.
First, inspect the wheel and make sure that it is not blocked by any debris or dirt. If the wheel is dirty or blocked, carefully clean the wheel with a soft cloth and make sure all debris is removed.
Next, ensure that the wheel is able to move freely by gently turning it in both directions. If the wheel does not turn easily, you may need to lubricate it with a few drops of oil.
Once you have checked the wheel, run a diagnostic test to confirm if the wheel is working correctly. To do this, use the iRobot Home App and select ‘Roomba Diagnostics’ from the menu. After running the test, check the results to make sure that all four wheels are properly connected and operational.
If you find that the wheel sensor is not functioning correctly, you may need to replace it. To do this, contact iRobot customer care or take your Roomba to an authorized repair center.
5. Perform a Soft Reset
A soft reset is a helpful solution to many Roomba charging error codes. To perform a soft reset, you will need to press and hold the CLEAN button for about 10 seconds. The Roomba should beep and the charging lights should turn on, indicating that the reset was successful.
This should help clear any charging errors and restore the robot’s normal function. However, if the error code persists, then proceed to the next step.
FAQs
Will resetting fix this issue?
If you’re having issues with your Roomba charging and are receiving Error 8, resetting it may help. Depending on the cause of the issue, resetting may be able to resolve it. If your Roomba is showing Error 8 due to a software issue, such as a corrupted firmware or a software bug, then resetting may be able to fix the issue. However, if the issue is hardware-related, then resetting the Roomba won’t be able to fix it.
Will Roomba sweep water from the floor?
No, Roomba will not sweep water from the floor. This is because Roomba is not designed to be immersed in water. In addition, it’s important to note that you should never submerge your Roomba in any liquid as this can damage its internal components. Even though Roomba has a built-in water reservoir, it should only be used to dispense water onto the floor while vacuuming and will not be used to clean up any existing spills or pools of water.
Will I need to recharge the Roomba every time I clean?
No, you don’t have to recharge the Roomba every time you clean. The Roomba is designed with an advanced cleaning system and advanced sensors to enable it to work for a longer period of time without needing to be recharged. It also has a battery power indicator which will let you know when it needs to be recharged. Generally, the Roomba can run for up to two hours before it needs to be recharged. However, if your home is larger, the Roomba may need to be recharged more frequently. To maximize battery life, it’s best to make sure that the Roomba is fully charged before starting each cleaning session.
we also have an article on The best robot vacuums for your home’s carpets