Mortal Kombat 1 Fatalities are gruesome finishing moves that have been a staple of the franchise since the first game’s release in 1992. These moves are not only satisfying to pull off but also add an extra layer of competition to the game. Knowing how to perform each character’s Fatality can give players a significant advantage in local and online matches.
In Mortal Kombat 1, each character has two Fatalities that players can perform. One Fatality is already listed in the character’s move list, while the other’s button inputs are locked until the player can find it. This article will provide players with a comprehensive guide on how to perform every character’s Fatality in alphabetical order, along with the range required to trigger the move. Whether you’re a seasoned veteran of the franchise or a newcomer, this guide will have you executing Fatalities like a pro in no time.
Performing Fatalities in Mortal Kombat 1 can be challenging, but it’s also incredibly rewarding. Not only do they add a layer of competition to the game, but they also offer a satisfying conclusion to a hard-fought battle. By following this guide, players can learn how to perform every character’s Fatality and gain a significant advantage over their opponents. So, get ready to finish your opponents in the most gruesome way possible with this comprehensive guide to Mortal Kombat 1 Fatalities.
Understanding Fatalities in Mortal Kombat 1
In Mortal Kombat 1, fatalities are the gruesome finishing moves that players can perform to end a match. Every character has their own unique fatality move, and executing them correctly can be a challenge.
To perform a fatality, the player must input a specific button combination after defeating their opponent. The announcer will shout “Finish him!” or “Finish her!” to signal that the player can perform a fatality. If the player fails to input the correct button combination within a short amount of time, the opponent will fall to the ground and the match will end.
It’s important to note that not all fatalities are available from the start. Some fatalities are locked and must be unlocked by meeting certain requirements, such as completing the game or performing a specific move during a match.
Here are some tips for performing fatalities in Mortal Kombat 1:
- Practice the button combinations in a safe environment, such as the training mode, before attempting them in a real match.
- Pay attention to the timing of the button inputs. Some fatalities require precise timing to execute correctly.
- Keep in mind that some fatalities require the player to be at a specific distance from their opponent.
- Don’t be afraid to experiment with different button combinations to find the one that works best for you.
By understanding the basics of fatalities in Mortal Kombat 1 and practicing the button combinations, players can unleash their character’s unique finishing move and add an extra level of excitement to their matches.
Steps to Execute Mortal Kombat 1 Fatalities: General Guide
Executing Fatalities in Mortal Kombat 1 can be a daunting task for new players. However, with practice and patience, anyone can master these moves. Here is a general guide on how to execute Fatalities in Mortal Kombat 1.
Step 1: Defeat Your Opponent
The first step to executing a Fatality is to defeat your opponent. Once you have won the match, you will have a short window of time to perform the Fatality move. If you take too long, the game will automatically end the match.
Step 2: Know Your Character’s Fatality Move
Each character in Mortal Kombat 1 has their own unique Fatality move. It is essential to know your character’s Fatality move before attempting to execute it. You can find a list of all the Fatalities for each character online, such as this guide.
Step 3: Enter the Correct Button Combination
Once you know your character’s Fatality move, you need to enter the correct button combination to execute it. The button combination for each Fatality move varies from character to character, so it is essential to memorize the correct combination for your character. You can find a list of all the button combinations for each Fatality move online, such as this guide.
Step 4: Execute the Fatality Move
After entering the correct button combination, your character will perform the Fatality move. It is important to execute the move quickly and accurately to ensure that it works. If you fail to execute the move correctly, you may need to start over and try again.
Step 5: Enjoy the Gruesome Finishing Move
If you have successfully executed the Fatality move, your character will perform a gruesome finishing move on your opponent. You can enjoy the satisfaction of watching your opponent meet their untimely demise.
In conclusion, executing Fatalities in Mortal Kombat 1 requires practice, patience, and knowledge of your character’s Fatality move and the correct button combination. With these steps in mind, you can master the art of executing Fatalities and impress your friends with your skills.
Character Specific Fatalities
Here are the specific Fatality moves for each character in Mortal Kombat 1:
Liu Kang’s Fatality
Liu Kang’s Fatality is called “Dragon Morph,” and it requires the player to be at close range. The player must then press forward, forward, forward, high punch. This will cause Liu Kang to transform into a dragon and bite the opponent in half.
Johnny Cage’s Fatality
Johnny Cage’s Fatality is called “Torso Rip,” and it requires the player to be at close range. The player must then press forward, forward, down, forward, low punch. This will cause Johnny Cage to grab the opponent’s head and rip their torso off.
Sonya Blade’s Fatality
Sonya Blade’s Fatality is called “Kiss of Death,” and it requires the player to be at close range. The player must then press down, forward, forward, high punch. This will cause Sonya Blade to kiss the opponent, causing them to explode.
Kano’s Fatality
Kano’s Fatality is called “Heart Rip,” and it requires the player to be at close range. The player must then press block, up, up, forward, low punch. This will cause Kano to rip the opponent’s heart out.
Raiden’s Fatality
Raiden’s Fatality is called “Electrocution,” and it requires the player to be at close range. The player must then press down, down, forward, forward, low punch. This will cause Raiden to electrocute the opponent, causing them to explode.
Scorpion’s Fatality
Scorpion’s Fatality is called “Toasty,” and it requires the player to be at mid-range. The player must then press down, up, up, low punch. This will cause Scorpion to remove his mask, revealing a skull, and breathe fire on the opponent.
Sub-Zero’s Fatality
Sub-Zero’s Fatality is called “Spine Rip,” and it requires the player to be at close range. The player must then press down, forward, forward, low kick. This will cause Sub-Zero to grab the opponent and rip their spine out.
Goro’s Fatality
Goro’s Fatality is called “Dragon Claw,” and it requires the player to be at close range. The player must then press forward, forward, down, down, high punch. This will cause Goro to grab the opponent and rip them in half.
Shang Tsung’s Fatality
Shang Tsung’s Fatality is called “Soul Steal,” and it requires the player to be at close range. The player must then press down, up, up, high punch. This will cause Shang Tsung to steal the opponent’s soul, causing them to crumble to dust.
Remember, these are just the default inputs for each character’s Fatality. Different versions of the game may have different inputs, and some characters may have additional Fatalities that can be unlocked.
Tips and Tricks for Executing Fatalities
Executing a Fatality can be a bit tricky, especially for new players. Here are some tips and tricks to help you perform Fatalities like a pro:
Memorize the Button Combos
Each character has their own unique button combo for their Fatality. It’s essential to memorize these button combos so that you can execute them quickly and efficiently. You can find a list of all the Fatalities and their button combos online, such as this one from Charlie Intel.
Distance Matters
The distance between you and your opponent can affect whether or not you can execute a Fatality. Some Fatalities require you to be close to your opponent, while others require you to be at a specific distance. Make sure you’re in the right position before attempting a Fatality.
Timing is Everything
The timing of your button inputs is crucial when performing a Fatality. You need to input the button combo quickly and accurately to execute the move. Practice the button combo in training mode until you can do it without hesitation.
Don’t Forget to Block
While you’re trying to execute a Fatality, your opponent may try to attack you. Don’t forget to block their attacks to avoid taking damage. You can also use a move that pushes your opponent away to create some distance between you and them.
Use the Pause Menu
If you’re having trouble executing a Fatality, you can use the pause menu to view the button combo. Pause the game, select “Move List,” and find the Fatality you want to perform. The button combo will be displayed on the screen, allowing you to input it correctly.
By following these tips and tricks, you’ll be able to execute Fatalities with ease and impress your friends with your Mortal Kombat skills.
Common Mistakes and How to Avoid Them in Mortal Kombat 1
Performing Fatalities in Mortal Kombat 1 can be tricky, especially for beginners. Here are some common mistakes players make and how to avoid them:
1. Not Standing at the Right Distance
Each character’s Fatality requires a specific distance from the opponent. If you’re too close or too far away, the Fatality won’t work. It’s important to pay attention to the range listed in the input directions and make sure you’re standing at the correct distance.
2. Inputting the Wrong Button Combination
Another common mistake is inputting the wrong button combination. Each character’s Fatality has a unique input sequence, and it’s easy to get them mixed up. Make sure to practice each Fatality until you have the button combination memorized.
3. Not Timing the Input Correctly
Timing is crucial when it comes to performing Fatalities in Mortal Kombat 1. You only have a few seconds to input the button combination after the “Finish Him/Her” prompt appears. If you wait too long, the prompt will disappear, and you’ll have to start over.
4. Getting Interrupted by the Opponent
It’s also possible for the opponent to interrupt your Fatality if they’re not defeated yet. Make sure to finish off your opponent before attempting a Fatality to avoid getting interrupted.
By avoiding these common mistakes, players can increase their chances of successfully performing Fatalities in Mortal Kombat 1.
Conclusion
In conclusion, understanding how to perform every character’s Fatality in Mortal Kombat 1 can be a daunting task for newcomers to the game. However, with the help of the provided search results, players can now easily learn the inputs required to perform these gruesome finishing moves.
It is important to note that each character only has access to one of their Fatalities by default. To unlock the rest of the Fatalities, players must complete certain requirements, such as performing a certain number of special moves or winning a certain number of matches.
While performing Fatalities may not be necessary to complete the game, they are a staple of the Mortal Kombat franchise and add an extra layer of excitement to the game. With practice and patience, players can master the inputs required to perform these moves and impress their friends with their skills.
Overall, Mortal Kombat 1 Fatalities are a fun and unique aspect of the game that add to the overall experience. With the help of the provided search results and some practice, players can easily learn how to perform every character’s Fatality and become a true Mortal Kombat champion.
You can also read