Why Is My Blink Camera Blinking Green?: When your Blink camera starts to flash green, it can be a confusing and sometimes worrying sight. It’s likely that you’re asking yourself why is my Blink camera flashing green. Well, the answer to that question isn’t always immediately apparent.
The flashing green light on your Blink camera could mean a few different things and it could be a sign of a minor problem or something more serious. In order to get to the bottom of this issue and ensure that your camera is functioning properly, it’s important to identify the cause of the flashing green light.
Fortunately, there are a few steps you can take to figure out why your Blink camera is flashing green and how you can resolve the issue. This blog post will explain the potential causes of your camera’s flashing green light and provide some troubleshooting tips to get it back up and running again.
Why Is My Blink Camera Flashing Green?
Blink Camera is one of the best home security cameras designed to provide 24/7 surveillance with motion-activated HD video recording and two-way audio. If you’ve recently noticed your Blink Camera flashing green, you may be wondering what this means and how to resolve the issue. A green flashing light on a Blink Camera indicates an error that needs to be addressed. This could be due to a variety of issues, including restarting the camera, checking the battery, checking the sync module, updating the firmware, or contacting customer support. Below, we’ll discuss the different ways to resolve this issue.
How To Resolve Blink Camera Blinking Green Light
Restarting the Camera
If your Blink camera is blinking green, it may be due to an issue with the system or connection. One of the easiest ways to troubleshoot this is to restart the camera. You can do this by unplugging the power source and plugging it back in after a few seconds. This should reset the camera and fix any issues that may have been causing it to flash green.
If you have a Blink XT2, you can also restart the camera by pressing and holding the sync button on the back of the camera for 10 seconds. The blue light will turn off and then come back on, which means the camera has restarted.
If restarting the camera does not fix the issue, then there may be a deeper issue at play and you should try other troubleshooting methods to resolve it.
Checking the Sync Module
If your Blink camera is blinking green, then it could be due to an issue with your sync module. The sync module is the hub for your Blink cameras and is used to connect all of them together, as well as allow you to control them remotely.
If you’re having trouble with your camera flashing green, then it could be because of a connection issue between your camera and the sync module. To check if this is the issue, you should unplug the power cable from the sync module and wait 10 seconds before plugging it back in.
Once you plug the power cable back in, the sync module will start up again and hopefully be able to reconnect your cameras. If this doesn’t work, then you may need to reset the sync module by holding down the reset button on the bottom of the device for 5 seconds. This should allow your Blink cameras to reconnect to the sync module and stop the green flashing.
If neither of these solutions works, then you may have a more serious issue with the sync module itself and will need to contact customer support for help.
Reboot Your Router
If your Blink camera is flashing green, it could be a sign that something is wrong with your internet connection. To make sure that your camera is getting the best signal possible, you should reboot your router. Unplug it from the power outlet and wait at least 10 seconds before plugging it back in.
After it has been plugged back in, wait a few minutes for the internet connection to be restored. You can then check your Blink app to make sure that the green blinking light is no longer present. If it is still flashing, then try checking the other potential causes mentioned in this article.
Power cycle Blink camera
If you’re experiencing issues with your Blink camera blinking green, then one potential solution is to power cycle the camera. Power cycling a device is a simple process that involves unplugging the device and plugging it back in after a few seconds. Doing this will reset the device’s settings and potentially resolve any technical issues.
To power cycle, your Blink camera, start by unplugging the device from its power source. Wait for a few seconds and then plug it back in. You may also want to remove the batteries from the camera and replace them after a few seconds. This should help to reset any settings that might have been affected and help to fix any issues with the flashing green light.
Once you’ve powered cycled your Blink camera, you should be able to check if the issue has been resolved. If the issue persists, then try checking your Sync Module and the battery level, as these could be causing the issue. If all else fails, then you can reboot your internet router, as this can also cause problems with Blink cameras.
Reset Blink outdoor security camera
If you have an outdoor Blink security camera, it may be necessary to reset it if it isn’t functioning correctly. Resetting your outdoor camera can help resolve any technical issues it might be having. Here’s how to reset your outdoor Blink security camera:
1. Locate the reset button on the back of the camera. It’s usually a small, round button.
2. Press and hold the reset button for 10 seconds. The LED light on the camera should begin to blink rapidly, indicating that the reset is in progress.
3. Wait until the LED light stops blinking, then release the reset button. This indicates that the camera has been reset successfully.
4. Reconnect your Blink camera to the Blink app. You may need to follow the instructions in the Blink app to add your camera again.
After resetting your Blink security camera, it should work as normal. If you’re still having trouble with your camera, it may be necessary to contact customer service for additional support.
Reconfigure The Camera Inside Your Blink App
If restarting your Blink camera and checking the Sync module, battery, and router have not resolved the flashing green light issue, you may need to reconfigure the camera inside your Blink app. To do this, open the Blink app on your smartphone and select the camera that is flashing green. Select “Reconfigure” and follow the instructions in the app to finish setting up your camera. After reconfiguring the camera, make sure to save the settings. Wait a few minutes and then check the status of your camera’s light to ensure the issue has been resolved.
We also have an article on Arlo vs Ring Camera here.